Oak Double Glazed Windows Outward Opening Sash Awning Side Hung Casement

Features:

Comfort-Tilt Double Hung window features a sash-over-sash design where both sashes open for ventilation and tilt-in for cleaning of the exterior glass surfaces from within the home or building.
Product Highlights
• Sun Clad Extruded Aluminum Exterior• Integral Nail Fin• Water Management System• Powder Coat Exterior Finish• Sun Advantage Low-E Insulated Glass with Argon• Duralite™ Glass Spacer System• Ponderosa Pine Interior• Complete Weather Seal Protection
Features
• Vertical Raise & Lower Sash Operation
• Tilt-In Sashes
• Cam Action Sash Locks
• Finger Release Tilt Sash Latches
• Plain (flat) Profile Sash Lock Rail
• Concealed Jamb Liner Exterior Face
• Positive Contact Floating Jamb Liners
• Spring Balance System
• Locking-when-tilted Sash Balance Shoes
• Exterior Screen
• Standard Jamb Depth = 4-9/16"

Features:

Upper hung window refers to a window with hinges (hinges) installed on the upper side of the window and opened inward or outward. Upper hung window refers to a window with hinges (hinges) installed on the upper side of the window and opened inward or outward. Upper hanging window is a kind of aluminum alloy and plastic steel window that appeared later. It is a new form developed on the basis of casement window. It has two opening modes, which can be opened horizontally and pushed from the top. When the casement window is closed, pull the upper part of the window inward to open a gap of about 250px, that is, the window can be opened a little from above, and the open part is suspended in the air and connected and fixed with the window frame through hinges, so it is called upper hanging type. The utility model has the advantages of ventilation and safety. Because there are hinges, the window can only open the seam of 250px, and can not reach in from the outside. It is especially suitable for use when there is no one at home. Recently, this function has not only been limited to flat windows, but also sliding windows can be hung up.

The size of the window is the same as that of the door. It usually refers to the height and width of the window opening. The dimension selection of windows shall consider the requirements of room lighting, ventilation, structural practice and architectural modeling, but mainly based on whether the room lighting meets the requirements. Therefore, the daylighting calculation shall be carried out for the room, and the ideal opening form meeting the daylighting requirements shall be selected, which shall comply with the provisions of the current unified standard for building modulus coordination (gbj2-86). For windows for general civil buildings, there are general drawings everywhere. The height and width of various windows usually use the 3M series of expanded modulus as the sign size of the opening. When necessary, they can be directly selected according to the required type and scale. Generally, the sash height of casement window is 800 ~ 1200mm, and the width should not be greater than 500mm; The sash height of the upper and lower suspended windows shall be 300 ~ 600mm, the sash height of the middle suspended window shall not be greater than 1200mm and the width shall not be greater than 1000mm; The height of sliding window shall not be greater than 1500mm.